Coupling Finishing Machine

Coupling Finishing Machine

1. Steel pipe is clamped with a double-chuck shape, and the pneumatic chuck adopts an imported big-diameter chuck. the clamping and loosening of the chuck can most effective be performed while the spindle stops. under the movement of the air manage take a look at valve, the air pressure inside the clamping cylinder stays unchanged and the movement is reliable.

2. Hydraulic servo tool holder adopts the device holder imported from italy, with speedy and solid indexing, no lifting mechanism, massive diameter toothed disc, excessive precision and large locking pressure.

3. Stopper is on the the front side of the primary shaft, which is used for positioning and stopping of the metallic pipe. its important function is to make certain the correct positioning of the metallic pipe inside the device tool. at the same time, whilst the metal pipe enters the machine device, if a fault occurs, the device tool can be successfully covered, the impact power of the steel pipe can be absorbed, and the steel pipe may be decelerated and stopped.

4.Inner help device is managed via hydraulic strain to realise the expansion and contraction of the inner support stabilizer, and rotate with the metal pipe. its major functions are: to stabilize the processing procedure and reduce noise; at the same time, absolutely block the pipe end to save you water from flowing out of the a ways cease of the pipe.

5. Non-obligatory tube body loading and unloading desk is used to switch tube body fabric to processing and loading and unloading positions.