inner protective robot-manufacture,factory,supplier from China

 Desheng robot for Inner protective ring tightening:Model Specification of protective ring7 "/13"/20 "Maximum screwing torque200/400NMNumber of jaws5/6Screw connection form floating screw connectionClamping mode of protective ringexternal clamp or internal supportScrew connection distance tolerance of protective ring± 0.5mmThe inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective r

Inner Protective Ring Material Arranging DeviceThe protective rings can be effectively screened and separated to reach the material taking position of the robot one by one, and the robot is assisted to complete the automatic material taking work through positioning, so that the material taking is accurate, and the efficiency is improved.

The inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective ring screwing process.

Inner Protective Ring Material Arranging DeviceDevice   Description/Instruction: The protective rings can be effectively screened and separated to reach the material taking position of the robot one by one, and the robot is assisted to complete the automatic material taking work through positioning, so that the material taking is accurate, and the efficiency is improved.

The protective rings can be effectively screened and separated to reach the material taking position of the robot one by one, and the robot is assisted to complete the automatic material taking work through positioning, so that the material taking is accurate, and the efficiency is improved.Device Specification: DSLH-7/13/20NProtection ring specification: 7 """"/13 """"/20 """"

Inner Protective Ring Tightening RobotDevice:Description/Instruction:   The inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective ring screwing process. It can be used with the inner and outer automatic oiling equipment and the inner and outer protective ring automatic feeding device to achieve the purpose of unmanned production of the post and effectively reduce labor and operating costs.

Desheng Inner protective ring tightening robot：This products are mainly equipment in the field of pipe processing, mainly including intelligent processing equipment for casing lines, intelligent processing equipment for optical pipes and intelligent processing equipment for coupling lines.Specification of Inner protective ring tightening robot：Model：protective ring7 "/13"/20 "Maximum screwing torque200/400NMNumber of jaws5/6Screw connection formfloating screw connectionClamping mode of protective ringexternal clamp or internal supportScrew connection distance tolerance

Outer Protective Ring Tightening RobotDeviceDescription/Instruction:The inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective ring screwing process. It can be used with the inner and outer automatic oiling equipment and the inner and outer protective ring automatic feeding device to achieve the purpose of unmanned production of the post and effectively reducelabor and operating costs.

  

The protective rings can be effectively screened and separated to reach the material taking position of the robot one by one, and the robot is assisted to finish the automatic material taking work through positioning. 1-2 times for a shift, 5 minutes at a time, can meet the production demand, reduce the number of workers' service times and service time.Device Specification: DSLH-7/13/20WProtection ring specification: 7 ""/13 ""/20 ""

The system comprises a multi-joint robot, a feeding system, an pipe cap front side and reverses side identification system, a cap turning system, a pipe holding fixture, a control system, and a safety protection system. The protective caps can be automatically plugged at the two ends of the steel pipe so that the inner wall of the steel pipe is prevented from being rusted or foreign matters are prevented from entering during long-term storage or transportation.

In the process of coil circulation, labels need to be pasted on the surface for identification. Through the connection between the six-axis robot system and the on-site MES system, it can automatically print labels, paste labels, and check label information. The system has the ability to identify the inner and outer diameter of the steel coil, identify the width of the steel coil, and check the weight information.DSTB-NW23Coil diameter: φ800 ~ φ2100mm;Steel coil width: 800 ~ 1650mm;Labeling position: inner ring and outer ring;Label size: 100mm × 200mm.

The internal and outer shielding ring screwing robotic gadget is the center gadget for petroleum pipe processing with a robotic because the service withinside the enterprise at present, which could extensively enhance the screwing overall performance of the protecting ring screwing process.

The unique air knife generation is used to make the compressed air frivolously and annularly spray at the floor of the metallic pipe thread, with a view to blow off the emulsion and scrap iron at the floor of the inner or outside thread, and it's far ready with a waste water restoration device.DSCS-7/13/20WSteel pipe specification: 7 ""/13 ""/20 ""

The coupling feeding robot device is mainly used for carrying the coupling or feeding and unloading the threading machine tool, which can obviously reduce the labor intensity of workers and effectively reduce the labor cost. Through the recognition of the 3D vision system, the coupling that can be carried is determined, and then the robot automatically grasps and loads the docking hoop without manual intervention.Specification：DSJS-7/13/20Coupling conveying specification: 7 "/13"/20 ";Number of jaws: 2 or 3;Clamping method of protective ring: internal support.

The inner and outer protecting ring screwing robotic system is the middle system for petroleum pipe processing with a robotic because the service withinside the enterprise at present, that could substantially enhance the screwing overall performance of the protecting ring screwing process. It may be used with the internal and outer computerized oiling system and the internal and outer protecting ring computerized feeding tool to obtain the reason of unmanned manufacturing of the put up and successfully lessen hard work and running costs.

 Automatic labeling robot In the process of coil circulation, labels need to be pasted on the surface for identification. Through the cennection between the six-axis robot system and the on-site MES system, it can automatically print labels, paste labels, and check label information. The system has the ability to identify the inner and outer diameter of the steel coil, identify the width of the steel coil, and check the weight information.Please contact us for more details.

The system is mainly used in the field of metallurgical steel coil products, and it is used to tape and label the coil after winding. Based on the labeling robot, the function is optimized, and the function of sticking tape is integrated. Added tape fixed-length cutting device, tape special suction cup, pressure roller, tape tail detection, and other functions.DSBD-NJ02Coil diameter: φ800 ~ φ2100mm;Steel coil width: 800 ~ 1650mm;Labeling position: inner ring and outer ring;Adhesive tape position: tape tail;Label size: 100mm × 200mm.

The system comprises a multi-joint robot, a code spraying device, a primer spraying device, a drying device, pipe end detection, a control system, a safety protection system, etc. It can automatically complete the identification of information on the inner and outer walls of steel pipes and can achieve the purpose of completely replacing manual work. The generated identification has a high definition, is not easy to fall off, and can be stored for a long time.

Automatic Steel Coil Labeling Robot SystemThe automatic steel coil labeling robot system is designed to apply labels on the surface of steel coils for identificationpurposes during the circulation process.Integrating a six-axis robot system with an on-site MES system enables automated label printing, application, and information verification.This efficient system accurately determines the inner and outer diameter of the steel coil, identifies its width, and verifies weight information.

Automatic Labeling RobotDevice    Description/Instruction: In the process of coil circulation, labels need to be pasted on the surface for identification. Through the connection between the six-axis robotsystem and the on-site MES system, it can automatically print labels,paste labels, and check label information. The system has the ability to identify the inner and outer diameter of the steel coil, identify the width of the steel coil, and check the weight information.

Robotic Pipe Code Spraying System The Print Robot System includes the 6-axis robot, printing equipment, primer spraying equipment, blow drying equipment, pipe end detection, and control system, and safety protection system.Information coding can be done automatically on the inner or outer wall of a sightseeing tour to achieve the purposeof entirely replacing manual work.The resulting information code has extreme sharpness and does not fall off easily. It can considerably increase production efficiency, reduce the number of workers and effectively reduce costs.